Inheritance diagram for UCA:
Public Member Functions | |
| UCA (const DynamicParameter &dyn_p) | |
| double | compute_delays (double inrisetime) |
| void | compute_power_energy () |
| UCA (const DynamicParameter &dyn_p) | |
| double | compute_delays (double inrisetime) |
| void | compute_power_energy () |
Data Fields | |
| DynamicParameter | dp |
| Bank | bank |
| Htree2 * | htree_in_add |
| Htree2 * | htree_in_data |
| Htree2 * | htree_out_data |
| Htree2 * | htree_in_search |
| Htree2 * | htree_out_search |
| powerDef | power_routing_to_bank |
| uint32_t | nbanks |
| int | num_addr_b_bank |
| int | num_di_b_bank |
| int | num_do_b_bank |
| int | num_si_b_bank |
| int | num_so_b_bank |
| int | RWP |
| int | ERP |
| int | EWP |
| int | SCHP |
| double | area_all_dataramcells |
| double | dyn_read_energy_from_closed_page |
| double | dyn_read_energy_from_open_page |
| double | dyn_read_energy_remaining_words_in_burst |
| double | refresh_power |
| double | activate_energy |
| double | read_energy |
| double | write_energy |
| double | precharge_energy |
| double | leak_power_subbank_closed_page |
| double | leak_power_subbank_open_page |
| double | leak_power_request_and_reply_networks |
| double | delay_array_to_sa_mux_lev_1_decoder |
| double | delay_array_to_sa_mux_lev_2_decoder |
| double | delay_before_subarray_output_driver |
| double | delay_from_subarray_out_drv_to_out |
| double | access_time |
| double | precharge_delay |
| double | multisubbank_interleave_cycle_time |
The documentation for this class was generated from the following files:
Generated on Fri Oct 22 2010 11:02:53 for SST by
1.7.1