interconnect Class Reference

Public Member Functions
	interconnect (string name_, enum Device_ty device_ty_, double base_w, double base_h, int data_w, double len, const InputParameter *configure_interface, int start_wiring_level_, bool pipelinable_=false, double route_over_perc_=0.5, bool opt_local_=true, enum Core_type core_ty_=Inorder, enum Wire_type wire_model=Global, double width_s=1.0, double space_s=1.0, TechnologyParameter::DeviceType *dt=&(g_tp.peri_global))
void	compute ()
void	set_in_rise_time (double rt)
void	SSTleakage_feedback (double temperature)
	interconnect (string name_, double base_w, double base_h, int data_w, double len, const InputParameter *configure_interface, int start_wiring_level_, enum Wire_type wire_model=Global, double width_s=1.0, double space_s=1.0, TechnologyParameter::DeviceType *dt=&(g_tp.peri_global))
void	compute ()
void	set_in_rise_time (double rt)
Data Fields
string	name
enum Device_ty	device_ty
double	in_rise_time
double	out_rise_time
InputParameter	l_ip
uca_org_t	local_result
Area	no_device_under_wire_area
double	max_unpipelined_link_delay
powerDef	power_bit
double	wire_bw
double	init_wire_bw
double	base_width
double	base_height
int	data_width
enum Wire_type	wt
double	width_scaling
double	space_scaling
int	start_wiring_level
double	length
double	min_w_nmos
double	min_w_pmos
double	latency
double	throughput
bool	latency_overflow
bool	throughput_overflow
double	interconnect_latency
double	interconnect_throughput
bool	opt_local
enum Core_type	core_ty
bool	pipelinable
double	route_over_perc
int	num_pipe_stages

---

The documentation for this class was generated from the following files:

• sst/core/techModels/libMcPATbeta/interconnect.h
• sst/core/techModels/libMcPATbeta06/interconnect.h
• sst/core/techModels/libMcPATbeta/interconnect.cc
• sst/core/techModels/libMcPATbeta06/interconnect.cc